Product Description; Intended Use - Beissbarth MT 857 L Betriebsanleitung

3.

Product description

3.1

Intended use

The MT 857 L is a wheel balancing machine featuring
mechanical wheel clamping for the balancing of car,
light van and motorcycle wheels with a rim diameter of
10" - 27" and a rim width of 1" -
The MT 857 L is to be used exclusively for this
purpose and solely for the range of applications
specified in these instructions. Any other purpose is not
consistent with the intended use and is therefore not
permissible.
!
The manufacturer cannot accept any liability for
possible damage arising from improper use.
!
These measurements refer to standard rims (A); for
particularly shaped rims (B - C) it is recommended
using specific accessories.
A
B
C
Beissbarth GmbH
20".
Product description | MT 857 L | 55
3.2 Prerequisites
The MT 857 L must be installed on a flat surface made
of concrete or similar material and anchored in position.
!
An uneven or vibrating surface can lead to
inaccurate imbalance measurements.
!
Any non-contiguous floor covering or deviation from
the above-mentioned safety requirements releases
the manufacturer from all liability for damage to
objects and/or personal injury.
en
|
1 695 656 930 2019-08-05