Beissbarth MT 857 L Betriebsanleitung Seite 54

en 54 | MT 857 L | User information
Safety standards for the use of the position indicator
with laser beam
Function
Radiated wave length
¶
The laser beam of the lighting system only serves
as a position indicator for affixing the balance
weights. Any use other than the intended use will be
considered non-compliant. The manufacturer rejects
any responsibility for improper use of the device.
Positions of the laser sources
2
1
Fig. 1: Positions of the laser sources
1 Main information plate position
2 Laser source on the lighting system
|
1 695 656 930 2019-08-05
Safety instructions
¶
¶
¶
¶
Specification
620 nm - 680 nm
¶
¶
¶
¶
¶
Do not look directly into the laser source and do not
expose eyes to laser beam.
Never direct the laser beam toward people or
animals, and do not look directly into the laser beam
or its reflection.
Never use laser goggles as safety goggles.
Laser goggles are used to better visually detect
the laser beam and not as protection from laser
radiation.
Never use laser goggles as sun glasses or behind the
wheel when driving.
Laser goggles do not offer complete protection from
UV beams and limit the perception of differences in
color.
Do not modify the laser equipment.
Switch off the wheel balancing machine before
performing any maintenance work, particularly if
work is to be performed in the immediate vicinity of
the laser sources or of areas directly exposed to the
laser beams.
The laser equipment must be repaired by trained
and briefed personnel using only original spare
parts. This enables the laser equipment to be used
safely.
Do not use the laser equipment in areas exposed to
explosion hazards or environments with flammable
liquids, gases or dust.
Sparks may form in the laser equipment and ignite
dust or vapors.
Protect the laser equipment from warmth as well as
continuous solar irradiation, fire, water and moisture.
Explosion hazard.
Beissbarth GmbH