Warning Indications; User Information; Safety Instructions; Electromagnetic Compatibility (Emc) - Beissbarth MT 857 L Betriebsanleitung

Above the pedal
STOP!
Pedal use
¶
Indicates the functions depending on how it is used.
Pedal down:
lock shaft/wheel.
Windows licence
¶
Licence version.
¶
Licence codes.
1.2.2

Warning indications

DANGER – Exposure of live parts on
opening the MT 857 L!
Risk of (fatal) injury or heart failure
from electric shocks on contact with live
components (e.g. master switch, printed
circuit boards).
¶
Work on electrical installations or
equipment is only to be performed by
qualified electricians or trained personnel
under the guidance and supervision of an
electrician.
¶
Disconnect the MT 857 L from the
mains before opening.
Below the quantity measurement system
WARNING - There are devices fitted to the product
that use laser beams!
¶
Indicates the type and properties of the laser
equipment used on the product and the immediate
risks of exposure.
Beissbarth GmbH
User information | MT 857 L | 53
2.

User information

2.1 Important notes
Important information on copyright, liability and
warranty provisions, as well as on equipment users
and company obligations, can be found in the separate
manual "Important notes on and safety instructions
for Beissbarth Tire Service Equipment". These instructions
must be carefully studied prior to start-up, connection
and operation of the MT 857 L and must always be
heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found in
the separate manual "Important notes on and safety
instructions for Beissbarth Tire Service Equipment". These
instructions must be carefully studied prior to start-up,
connection and operation of the MT 857 L and must
always be heeded.
2.3

Electromagnetic compatibility (EMC)

The MT 857 L satisfies the requirements of the EMC
directive 2014/30/EU.
The MT 857 L is a class B product as per EN 61 326.
en
|
1 695 656 930 2019-08-05