Continuous Run; Short-Term Centrifugation - Hettich HAEMATOKRIT 200 Bedienungsanleitung

EN
16.2

Continuous run

 Press the key to activate the RPM display
RCF
(RPM) or the RCF display ( RCF ) as
needed.

 Input the desired centrifugation parameters. Set the
parameters t/min and t/sec to zero (see the chapter
"Entering centrifugation parameters").

 Press the key to start the centrifugation
START
PULSE
run.
During the centrifugation run, the rotor
speed or the resulting RCF value and
elapsed time are displayed.

 Press the key to end the centrifugation
STOP
OPEN
run.
The run-out occurs with the set brake
stage. The brake stage is displayed.
Example f
16.3

Short-term centrifugation

 Press the key to activate the RPM display
RCF
(RPM) or the RCF display ( RCF ) as
needed.

 Enter the desired centrifugation parameters (see the
chapter "Entering centrifugation parameters").

 Press the key and keep it pressed.
START
PULSE
During the centrifugation run, the rotor
speed or the resulting RCF value and
elapsed time are displayed.

 Release the key again to end the
START
PULSE
centrifugation run.
The run-out occurs with the set brake
stage. The brake stage is displayed.
Example f .
56/134
Example:
RPM display (RPM)
>RCF< RPM t/min:s
>RCF< RPM t/min:s
RPM
>RCF< t/min:s
>RCF< RPM t/min:s
Example:
RPM display (RPM)
>RCF< RPM t/min:s
RPM
>RCF< t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
Rev. 07 / 05.2020
Example:
RCF display ( RCF )
>RCF< RPM t/min:s
>RCF< RPM t/min:s
RPM
>RCF< t/min:s
>RCF< RPM t/min:s
Example:
RCF display ( RCF )
>RCF< RPM t/min:s
RPM
>RCF< t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
AB1801DEENFRIT