Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Is there an indication >100, the RS485 interface connection has to be checked!
To leave the submenu press the
Press
7.22 Submenu - RS 485 Interface
Press
LOCAL:
REMOTE:
To leave the submenu press the
Press
Downloaded from
www.Manualslib.com
7.21.8 Error Signals for Data Bus Interruptions
BUSARBIT-DIAG.
0
S U B M E N U
Seq. Control
on the Hydrovar-Smart to change to
S U B M E N U
RS 485-Interface
7.22.1 Pump Address
PUMP-ADDRESS
OFF
interface (max. 4) each pump must be allocated its own address number.
Each address may only be used once!
on the Hydrovar-Smart to change to
7.22.2 ADC Reference
ADC REFERENCE
Local
Actual value from transmitter (Terminal X1/ 1-2)
Actual value via RS-485 (Terminal X5 or X6 / 1-2-3)
S U B M E N U
RS 485-Interface
on the Hydrovar-Smart to change to
manuals search engine
Counts the number of fault synchronising attempts
over the RS-485 interface.
longer than 3 sec. to change to
Press
for about 3 seconds to enter the submenu
and the display changes to
If only one pump is used, the setting remains OFF. If
several pumps are connected via the RS-485
Reference for the local ADC (Analogue/Digital-
Converter) or SIO (RS485 interface).
longer than 3 sec. to change to
34
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
