Declaration Of Performance - Conel FLOW Betriebsanleitung

1. Unique identification code of the product-type:
FLOW CUT BOX. Lifting plant for wastewater containing faecal matter for limited
2. Type, batch or serial number or any other element allowing identification of
the construction product as required under Article 11(4):
3. Intended use or uses of the construction product, in accordance with the
applicable harmonized technical specification, as
Drainage of locations below flood level in buildings and sites to
4. Name, registered trade name or registered trade mark and contact address of
the manufacturer as required under Article 11(5):
© CONEL GmbH, Margot Kalinke-Str. 9, 80939 München,
6. System or systems of assessment and verification of constancy of perfor-
mance of the construction product as set out in CPR, Annex V:
7. In case of the declaration of performance concerning a construction
EN 12050-3:2014. Notified type test laboratory No. 0197 performed the
determination of the product-type on the basis of type testing.
9. The performance of the product identified in points 1 and 2 is in conformity with
This declaration of performance is issued under the sole responsibility of the

Declaration of Performance:

Nr. 0016CPR2013-08-08
applications to EN 12050-3:2014.
Part number: 07565214.
foreseen by the manufacturer:
prevent any backflow of wastewater.
Phone: +49 89 31 86 87 80.
5. Not applicable.
1.1.4. System 3.
1.1.5. System 4 (ref. 3.1. Reaction to fire).
product covered by a harmonized standard:
Certificate number: 57214026.
8. Not applicable.
the declared performance in point 10.
manufacturer identified in point 4.
6