Safety Precautions - PeakTech 1070 Bedienungsanleitung

1. Safety Precautions

This product complies with the requirements of the following
European Community Directives: 2004/108/EC (Electromagnetic
Compatibility) and 2006/95/EC (Low Voltage) as amended by
2004/22EC (CE-Marking).
Overvoltage category III 300V; TÜV/GS; pollution degree 2.
CAT I:
CAT II:
CAT III:
CAT IV:
To ensure safe operation of the equipment and eliminate the danger
of serious injury due to short-circuits (arcing), the following safety
precautions must be observed.
Damages resulting from failure to observe these safety precautions
are exempt from any legal claims whatever.
* Do not use this instrument for high-energy industrial installation
* Do not place the equipment on damp or wet surfaces.
* Do not exceed the maximum permissible input ratings (danger of
Downloaded from www.Manualslib.com
For signal level, telecommunication, electronic with small
transient over voltage
For local level, appliances, main wall outlets, portable
equipment
Supplied from a cable under earth; fixed installed
switches, automatic cut-off or main plugs
Units and installations, which are supplied overhead
lines, which are stand in a risk of persuade of a lightning,
i.e. main-switches on current input, overvoltage-diverter,
current use counter.
measurement.
serious injury and/or destruction of the equipment).
manuals search engine
-20-