Engineering Tool »Easy Starter - Lenze i950 Montage- Und Einschaltanleitung

Engineering tool »EASY Starter«
The »EASY Starter« is a PC software that is especially designed for the commissioning and diagnostics of the
inverter.
• »EASY Starter« Download
Sample screenshot:
The five main commissioning steps are shown in order towards the top of the Settings tab. Clicking on a link
displays a corresponding interface containing the most important parameters that need to be set.
Commissioning step Description of the settings
Basic setting Settings for adjusting the inverter to a simple application based on the default settings.
Communication Settings for communication via the on-board EtherCAT, another network option, and the engineering
port X16 (PC interface).
Kinematics Basic settings of the technology application for adjusting the motor end and load side (gearbox ratio,
mounting direction, moments of inertia, etc.)
Motion Basic settings of the technology application for adjusting the motion control.
Technology application Settings for adjusting the technology application for the application.
Parameter fields
• The parameters are sorted thematically.
• The currently set parameter values are displayed.
• Fields highlighted in yellow indicate an online connection to the device.
• Pressing the [F1] key opens the program help.
Commissioning
Operating interfaces
Engineering tool »EASY Starter«
175