Application As Directed; Foreseeable Misuse - Lenze i950 Montage- Und Einschaltanleitung

Application as directed

• The product serves to control three-phase AC motors and servo motors.
• The product must only be actuated with motors that are suitable for the operation with inverters.
• The product is not a household appliance, but is only designed as a component for commercial or
professional use in terms of EN 61000−3−2.
• The product is solely suited to be installed in control cabinets or similar closed electrical operating areas.
• The product must only be actuated under the operating conditions and power limits specified in this
documentation.
• The product meets the protection requirements of2014/35/EU: Low-Voltage Directive.
• The product is not a machine in terms of 2006/42/EU: Machinery Directive, with the exception of all
functions of the functional safety.
• Commissioning or starting the operation as directed of a machine with the product is not permitted until
it has been ensured that the machine meets the regulations of the EC Directive 2006/42/EU: Machinery
Directive observe; EN 60204−1 .
• Commissioning or starting operation as directed is only permissible if the EMC Directive 2014/30/EU is
complied with.
• In residential areas, the product may cause EMC interferences. The operator is responsible for taking
interference suppression measures.

Foreseeable misuse

Inverters are not to be operated with DC motors.
Safety instructions
Foreseeable misuse
103