Operating Interfaces - Lenze i950 Montage- Und Einschaltanleitung

Commissioning

Operating interfaces

Operating interfaces
Depending on the inverter, there are one or several options for accessing the device parameters that are
available for customizing the drive task.
Simple access to the device parameters is provided by the Lenze Engineering Tool »EASY Starter«.
Connection X16 is used as an interface for an engineering PC in this case.
Alternatively, the inverter can also be accessed via the optional "PROFINET" network options with the X256
or X257 connections, or EtherNet/IP with the X266 or X267 connections.
174