Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Furthermore, the battery charges via the USB interface if an
appropriate battery is inserted. The battery charge is done both
in connection with the included AC power adapter, as well as in
connection with the PC. For more information, see the chapter
6.2.
*
In connection with the PC, a USB icon appears in the display
of the device. You can now share data but do not use
measuring functions. The battery is charged.
*
In connection with the AC adapter you can use all the
measurement functions. The charging of the battery is
displayed with a refilling battery icon.
3.2.4. Type K temperature measurement
*
Plug the connector into the marked + and - terminals
*
Pay attention to the correct polarity
*
After this the Type K temperature measurement (TK) is
available in all measurement modes
To connect to a PC or charger, plug-in
the included USB cable to the mini-port
USB and the other end of the USB
connector to the charger or the PC USB
interface.
This device is equipped with a type-
K multi-function sensor. It is the only
external sensor of the Peaktech
4955 and must be used with the K-
type connector (+ -) which is placed
in the service panel. It can also be
used with any other type-K probes.
-50-
®
Werbung
