Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.2.2. External Memory
Measurement data, video and photos are stored automatically
on Micro-SD card if inserted to the slot. You can manually switch
between the internal memory and Micro SD card in the
"Settings" menu under the menu item "Memory status".
Remove the memory card:
*
Open the battery compartment
*
Press down on the edge of the card until a snapping sound
is heard
*
Pull out the card
3.2.3. USB interface
With the USB interface, data can be exchanged with the
computer.
For the detection of the device under Windows, no drivers are
required and the installation runs automatically. The internal
memory and the memory card will be detected under Windows
operating system as a removable media which you can access
with "computer" or "My Computer".
Insert the memory card:
*
Open
compartment
*
The contacts must point to
the outside of the unit
*
Insert the memory card
into the card slot side
*
The card is positioned
correctly when a short
snapping sound is heard
-49-
the
battery
Werbung
