PeakTech 4955 Bedienungsanleitung Seite 47

Brightness
Auto Power Off
Display Timeout
Keypress signal
Memory status
Factory setting
Change the desired options exit the menu by pressing the "ESC"
key to return to the previous menu. The changes are saved
automatically.
3.1.7. Measure Set
Set display
(30 – 100%)
Set the time unitl device powers
off automatically
3/15/60 min)
Set the time unitl display powers
off automatically
30/60/180 sek.)
Enable/Disable key sound
Displays the stored data and
selected Memory Type (internal,
micro-SD in MB)
Reset device to factory settings
The menu "MEASURE SET "is a
sub-menu you can reach from the IR
camera, IR measurement and the
measurement of dew point" with
pressing the "ENTER "key during
the measurement in one of these
modes.
Press the ▲and ▼ keys to select
the desired menu item, where you
want to change options. Afterwards
press the "Enter" key to confirm the
executed changes.
-46-
brightness
(disabled,
(disabled,