PeakTech 4955 Bedienungsanleitung Seite 42

3.1.2. IR Measure
as infrared temperature, air temperature (AT), relative humidity
(RH), dew point temperature (DP), the wet bulb temperature
(WB), differential temperature (DIF), average temperature
(AVG), Type-K contact temperature probe (TK) and the
minimum and maximum values (MIN, MAX)
In the IR measurement mode additional general information is
displayed such as date / time, battery charge, laser ON / OFF
(☼), record / pause (► II) and the emission factor (ε).
Furthermore, a bar graph is displayed. The left end indicates the
minimum measured value (MIN) and the right end of the bar
graph indicates the maximum reading (MAX). For additional
measurements it provides a pointer of the actual measured
value relative to the minimum and maximum measured value.
Press the "ESC" key to return to the previous menu after
completion of the measurement.
The IR measurement mode is useful
for quick and easy data acquisition
and storage without documentation
of the measurements.
In the IR-measurement mode, the
same measurements are displayed
as in the IR-camera mode. These
can be activated and deactivated in
the submenu "MEASURE SET "by
pressing the "ENTER" button.
Pressing the Trigger-key starts the
display of measurement data such
-41-