Werbung
Verfügbare Sprachen
Verfügbare Sprachen
To start a video recording, press the "VIDEO / ▼"-key in IR
camera menu. In the next submenu, you can press the "ESC"
key to return to photo mode or start video recording by Pressing
the "VIDEO / Down" key again and the Trigger key afterwards.
The maximum recording time in hours, minutes and seconds is
shown in display.
The duration is depending on the inserted storage medium
(Micro SD) or the remaining space of the internal memory.
Furthermore, the current recording time ([●]) is shown in hours,
minutes and seconds.
After the measurement, press the "Esc" key. The video
recording is automatically saved and can be found in the main
menu under the menu item "Data Memory".
In "Data Memory" mode you can display or delete the recorded
video files.
In the video recording mode, the
same
measurement
shown, as in the photography mode.
These can be switched ON or OFF
in the submenu "MEASURE SET ".
Enter the "MEASURE SET "- menu
by pressing the "ENTER"-key in IR-
Camera mode.
In addition, general information such
as lasers ON / OFF (☼), record /
pause (► II) and the emission factor
(ε) are shown in display.
-40-
values
are
Werbung
