Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.1.1. IR Cam
The values can be activated and disabled in the "MEASURE
SET" submenu. You can enter the submenu "MEASURE SET"
by pressing the "ENTER" key in the IR camera mode.
In the IR camera mode there is also general information
displayed such as date / time, battery charge, laser ON / OFF
(☼), record / pause (► II), zoom in / out (↑ ↓) and the emission
factor (ε).
To record the current readings, press the "Camera / ▲"- key
while holding the trigger-key. You will hear a camera sound and
you have the option to save the photo by pressing the "camera /
On" button or the "Video ▼" key to delete the snapshot. After
saving, the device automatically returns to the IR camera menu.
The IR camera mode is useful for
documenting and storing measure-
ment data in photo or video format.
After selecting the IR camera mode
from the main menu the photo mode
is enabled automatically. Pressing
the trigger- key starts the display of
measurement data such as infrared
temperature, air temperature (AT),
relative humidity (RH), dew point
temperature (DP), the wet bulb
temperature
temperature
temperature (AVG) , Type-K contact
temperature probe (TK) and the
minimum
and
(MIN, MAX).
-39-
(WB),
differential
(DIF),
average
maximum
values
Werbung
