Intended Use; Basic Safety Information - bürkert 8232 Bedienungsanleitung

2.

inTenDeD use

use of the sensor that does not comply with the instructions
could present risks to people, nearby installations and the
environment.
• The 8232 sensors with a 4-20 mA output are used to measure
the free chlorine concentration in water.
• The 8232 sensor with a 0-2 V output is used to measure chlo-
rine concentration in water at very low concentrations.
• Use the sensor in compliance with the specifications and
conditions of commissioning and use given in the contractual
documents, in these Operating Instructions.
• Safe and trouble-free operation of the sensor depends on its
proper transport, storage and installation, as well as careful
operation and maintenance.
• Only use the sensor as intended.
• Observe any existing restraints when the sensor is exported.
4
english
Type 8232
Intendeduse
3.

bAsic sAfeTy informATion

This safety information does not take into account:
• any contingencies or occurences that may arise during installation,
use and maintenance of the devices.
• the local safety regulations for which the operating company is res-
ponsible including the staff in charge of installation and maintenance.
Danger due to electrical voltage.
Danger due to high pressure in the installation.
Danger due to the nature of the fluid.
Various dangerous situations
To avoid injury take care:
• to prevent any unintentional power supply switch-on.
• to ensure that installation and maintenance work are carried out
by qualified, authorised personnel in possession of the appro-
priate tools.
• to guarantee a set or controlled restarting of the process, after a
power supply interruption.
• to use the sensor only if in perfect working order and in
compliance with the instructions provided in the Operating
Instructions.