hajdu HB200 Handbuch Über Inbetriebnahme, Bedienung Und Wartung Seite 72

_________________________________ ___EN__________________________________25
Checking the timer
 To enter its settings menu, press the 'CLOCK' button once.
 Using the 'DOWN' or 'UP' arrow, select one of the 6 timer programs (
6) that you want to set. In the meantime, the icon of the selected timer
program flashes slowly, and the command set by the timer displays*** If you
have set the start time, the last temperature value set will display. If you have
set the switch off time, the '
 Press and hold down the 'CANCEL' button for 3 seconds, or do not press any
button for half a minute to quit the checking menu.
Remark:
If there is a conflict between the timer and the manual start:
Manual start will always override timed stopping.
2.
Deleting an error code
 Simultaneously press the 'ENTER' and 'CLOCK' buttons. This will delete all
error codes displayed on screen.
 The appliance will sound an audible signal.
' text will display.
1 to