Cleaning; General Maintenance; Storage; Waste Disposal/Environmental Protection - Parkside POF 1200 B2 Originalbetriebsanleitung

The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.

Cleaning

Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
Do not use cleaning agents or sol-
vents. You may otherwise irrepara-
bly damage the appliance.
• Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.

General maintenance

• Prior to every use, check the appliance
for obvious defects such as loose, worn
or damaged parts.
• If the ball bearing (a) of a
cutter has come loose, tighten it
again using the Allen key (28)
that is included in the delivery.

Storage

• Clean the device prior to storage.
• Store the appliance in a dry place well
out of reach of children.
• Store the cutter in the packaging in-
cluded in the delivery. Avoid contact
with other metal parts or cutter blades.
Waste Disposal/envi-
ronmental protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Electrical machines do not belong
in domestic waste.
Take the equipment to a waste disposal
site. The plastic and metal parts that are
used can be separated out into pure
grade, which allows recycling. Ask our
Service Centre for details.
Defective units returned to us will be dis-
posed of for free.
a
GB MT
67