Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning/Maintenance; Cleaning; General Maintenance; Storage - Parkside POF 1200 C2 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für POF 1200 C2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
1. Turn the parallel stop (24) around
so that the stop edge points up.
2. Screw on the centring tip (23)
on the parallel stop by means of
the butterfly nut. In the process,
counter lock the centring tip in
the long hole of the combination
wrench (
3. Screw the guide bars (29) of the
parallel stop (24) on the base-
plate (10) and tighten the retain-
ing screws (9).
4. Push the centring tip (23) in the
marked centre of the circle to be
cut.
5. Move the machine circularly once
in the circle around the centring
tip (23).

Cleaning/maintenance

Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts. In this way you avoid dam-
age to the appliance and possible
injury to people.
Pull out the power plug before car-
rying out any work on the equip-
ment. There is a risk of electrocution
or of injury from moving parts.
Always wear protective gloves
when handling cutters to avoid cut-
ting yourself.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.
27).

Cleaning

Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
Do not use cleaning agents or sol-
vents. You may otherwise irrepara-
bly damage the appliance.
Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.

General maintenance

Prior to every use, check the appliance
for obvious defects such as loose, worn
or damaged parts.
If the ball bearing (a) of a
cutter has come loose, tighten it
again using the Allen key (
28) that is included in the deliv-
ery.

Storage

Clean the device prior to storage.
Store the appliance in a dry place well
out of reach of children.
Store the cutter in the packaging in-
cluded in the delivery. Avoid contact
with other metal parts or cutter blades.
Waste Disposal/envi-
ronmental protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
GB
IE
a
33

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis