Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Data; Safety Instructions; Symbols On The Appliance - Parkside POF 1200 B2 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für POF 1200 B2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 72
GB
MT

Technical data

Rated input voltage .......... 230 V~, 50 Hz
Idling speed n
..........11000-30000 min
0
Power input ..............................1200 W
Plunge depth ............................... 55 mm
Tool holder .......................... 6 mm/8 mm
Protection class .................................
Protection category...........................IP20
Weight (incl. accessories) ...approx. 3.4 kg
Sound pressure level
(L
) ........................90 dB(A); K
PA
Sound power level
(L
) .................... 101 dB(A); K
wA
Vibration (a
) .......... 5.4 m/s
h
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes may be
undertaken in the course of further devel-
opment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
58
-1
II
=3 dB
PA
=3 dB
WA
; K=1.5 m/s
2
2

Safety instructions

Ensure that the safety instructions are ob-
served when operating the appliance.

Symbols on the appliance

Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).
Attention!
Pull out mains plug immediately, if
the mains cable is damaged, entan-
gled or severed.
Always remove the mains plug be-
fore working on the device.
Read the manual.
Wear ear protection.
Wear eye protection.
Wear breathing protection.
Electrical appliances must not be
disposed of with the domestic
waste.
Protection class II

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis