Warranty; Technical Data - Kärcher HDS 8/20 De Handbuch

The fuel filter is clogged
1. Replace the fuel filter.
There is no ignition spark
1. If no ignition spark is visible through the burner sight
glass during operation, have the device checked by
the authorized Customer Service.
Fuel atomization at the burner nozzle is uneven
1. Replace the fuel filter.
The level switch in the fuel tank has switched off the device
1. Top up the fuel tank.
Water shortage safeguard does not switch on - no
flame
The water inlet is closed
1. Open the water inlet.
The water supply volume is too low
1. Increase the water supply volume.
Internal combustion engine
Engine type
Power
Specific consumption
Engine speed
Water connection
Feed pressure (max.)
Input temperature (max.)
Input amount (min.)
Suction height (max.)
Minimum water supply hose length
Minimum water supply hose diameter
Device performance data
Degree of protection
Nozzle size of standard nozzle
Water flow rate
Water operating pressure with standard nozzle
Excess operating pressure safety valve (maximum)
Hot water operating temperature (maximum)
Burner output
Fuel consumption (max.)
High-pressure gun recoil force
Operating materials
Fuel type
Motor oil type
Engine oil volume
Fuel
Pump oil type
Pump oil volume
Dimensions and weights
Weight (without accessories)
Length x width x height
Fuel tank capacity
The sieve in the safety block is clogged
1. Clean the sieve in the safety block (see chapter
Cleaning the sieve in the safety block).
The valves in the high-pressure pump piping are leaking
or contaminated
1. Contact the authorized Customer Service.
The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)

Technical data

HDS 8/20 De
LC186F(D)
kW/PS 6,8 / 9,2
l/h 2,2
1/min 3350-3450
MPa (bar) 0,6 (6)
°C 30
l/h (l/min) 1000 (16,7)
m 0,5
m 7,5
in 3/4
IPX5
045
l/h (l/min) 800 (13,3)
MPa (bar) 20 (200)
MPa (bar) 25 (250)
°C 80
kW 64
kg/h (l/h) 5,9 (7,0)
N 45
Diesel
SAE 10 W30,
SAE 15 W40
l 1,2
EL heating oil or die-
sel
15W40
l 0,4
kg 234
mm 1130 x 910 x 895
l 4,5
English

Warranty

HDS 8/20 G
G300FA
6,8 / 9,2
3,2
3300-3400
0,6 (6)
30
1000 (16,7)
0,5
7,5
3/4
IPX5
045
800 (13,3)
20 (200)
25 (250)
80
64
5,9 (7,0)
45
Petrol
SAE 10 W30
0,8
EL heating oil or die-
sel
15W40
0,4
190
1130 x 910 x 895
6,0
23