Specifications - Beurer BM 77 Gebrauchsanweisung

Disposing of the batteries
• The empty, completely flat batteries must be disposed of
through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to
dispose of the batteries.
• The codes below are printed on batteries
containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.

12. Specifications

Device
Model no. BM 77
Type BM 75
Measurement Oscillometric, non-invasive blood pres-
method sure measurement on the upper arm
Measurement range Cuff pressure 0 – 299 mmHg,
systolic 30 – 260 mmHg,
diastolic 30 – 260 mmHg,
Pulse 40 –199 beats/minute
Display accuracy Systolic ± 3 mmHg, diastolic ± 3 mmHg,
pulse ± 5 % of the value shown
Measurement Max. permissible standard deviation
inaccuracy according to clinical testing:
systolic 8 mmHg /diastolic 8 mmHg
Memory 2 x 60 memory spaces
Dimensions
Weight
Cuff size
Permissible operating
conditions
Permissible storage
and transport condi-
tions
Power supply
Battery life
Classification
Data transfer via
wireless
Bluetooth ®
technology
The serial number is located on the device or in the battery
compartment.
Technical information is subject to change without notification
to allow for updates.
41
L 175 mm x W 117 mm x H 50 mm
Approx. 518 g (without batteries, with
cuff)
24 to 40 cm
+10 °C to + 40 °C, 15 % – 85 % relative
air humidity (non-condensing)
- 10 °C to + 60 °C, 10 % – 90 % relative
air humidity, 700 –1013 hPa ambient
pressure
4 x 1,5 V AAA batteries
For approx. 120 measurements, de-
pending on the blood pressure level
and/or pump pressure
Internal supply, IP21, no AP or APG,
continuous operation, application part
type BF
The blood pressure monitor uses Blue­
tooth low energy technology,
®
2402MHz – 2480MHz frequency band,
Transmission power max. 4.54 dBm,
Compatible with Bluetooth
phones/tablets
4.0 smart-
®