Signs And Symbols; Intended Use - Beurer BM 77 Gebrauchsanweisung

2. Signs and symbols

The following symbols are used on the device, in these instruc-
tions for use, on the packaging and on the type plate for the
device:
WARNING
indicates a hazardous situation which, if not
avoided, could result in death or serious
injury.
CAUTION
indicates a hazardous situation which, if not
avoided, may result in minor or moderate
injury.
Product information
Note on important information
Observe the instructions
Read the instructions before starting work
and/or operating devices or machines
Isolation of applied parts, type BF
Galvanically isolated application part (F
stands for "floating"); meets the require-
ments for leakage currents for type BF
Direct current
The device is suitable for use with direct
current only
Disposal in accordance with EC Direc-
tive WEEE (Waste Electrical and Electronic
Equipment)
Do not dispose of batteries containing haz-
ardous substances with household waste
Dispose of packaging in an environmentally
21
friendly manner
PAP
Manufacturer
Storage/Transport Permissible storage and transport tempera-
ture and humidity
Operating
Permissible operating temperature and hu-
midity
Protected against foreign objects equal to
IP21
or greater than 12.5 mm in diameter and
against vertically falling drops of water
Serial number
SN
CE labelling
This product satisfies the requirements of
the applicable European and national direc-
tives

3. Intended use

Intended use
The blood pressure monitor is intended for the fully automatic,
non-invasive measurement of arterial blood pressure and pulse
values on the upper arm.
24