Maintenance Table - ECOLAB EcoPro Serie Betriebsanleitung

9.2

Maintenance table

Interval
24 hours after
commissioning or
metering head
servicing
Daily
1/2 yearly
Maintenance work
Checking the metering head screws
The tightening torques of the metering head screws are
attached to the pump heads using adhesive labels. In
addition, these are specified in the
the dosing valve in the correct position' on page 61 and in
Ä Chapter 13.6 'Tightening torques' on page 86
the
chapter.
Visual inspection: Check leak-tightness of connection parts.
Visual inspection of metering lines
Check on suction and pressure lines for leak-free connection; Operator
Check the suction and pressure valves for dirt and tightness. Mechanic
Check the drainage connection on pump head (broken
diaphragm)
Check correct metering
Checking the metering head screws
The tightening torques of the metering head screws are
attached to the pump heads using adhesive labels. In
addition, these are specified in the
the dosing valve in the correct position' on page 61 and in
Ä Chapter 13.6 'Tightening torques' on page 86
the
chapter.
Ä Chapter 9.4 'Installing
Ä Chapter 9.4 'Installing
59
Servicing
Personnel
Mechanic
Mechanic
Operator
Mechanic
Operator
Mechanic
Operator
Operator
417102264 Rev. 6-12.2019