Installation, Maintenance And Repair Work; Safety Data Sheets - ECOLAB EMP IV Betriebsanleitung

Safety
ENVIRONMENT!
Leaked, spilled dosing media can harm the environment.
Leaked, spilled dosing media must be cleaned and disposed of correctly,
according to the instructions on the product data sheet. It is essential to ensure
that the required personal protective equipment is used.
Preventive action:
Place product containers in a tank to collect leaking fluids without harming the
environment.
2.10

Installation, maintenance and repair work

NOTICE!
Material damage by using incorrect tools!
Material damage may arise by using incorrect tools.
Only use the correct tools.
DANGER!
Damage and injuries may occur if installation, maintenance or repair
work is carried out incorrectly.
All installation, maintenance and repair work must only be performed by
authorised and trained specialist personnel in accordance with the applicable
local regulations. Safety regulations and prescribed protective clothing when
handling chemicals should be followed. Attention must be paid to the
information included on the product data sheet for the metering medium used.
Prior to all work the feeding of the dosing medium should be disconnected and
the system cleaned.
NOTICE!
Only original equipment spare parts may be used for maintenance and
repairs.
2.11

Safety data sheets

DANGER!
Safety data sheets are always provided with the chemistry supplied.
They must be read and understood before use and all instructions must be
implemented on site. The operator must provide the necessary protective
equipment (PPE) and the described emergency equipment (e.g. eye bottle,
etc.) on the basis of the safety data sheets. In addition, the operator must
instruct and train the persons to be entrusted with the operation of the
equipment accordingly.
MAN050418 Rev. 1-10.2021 16