Packaging; Symbols On The Packaging - ECOLAB EcoPro Serie Betriebsanleitung

1.4

Packaging

The individual packages are packaged according to the expected transport conditions.
Only environment-friendly materials were used for the packaging. The packaging is
designed to protect the individual components up to assembly against shipping damage,
corrosion and other damage.
Therefore, do not destroy the packaging and only remove it just before assembly.
ENVIRONMENT!
Risk of environmental damage due to incorrect disposal!
Packaging materials are valuable raw materials and can, in many cases, be
used again or be usefully processed and recycled.
Incorrect disposal of packaging materials can be a threat to the
environment.
– Observe the locally applicable disposal regulations!
– Environmentally-friendly disposal of packaging materials.
– If necessary, hire a specialist to carry out disposal.

Symbols on the packaging

Symbol Description
Keep this product
Protect against
Stack limiting
Electrostatic
sensitive device
Description
The package must be principally transported, handled and stored in such a
way that the arrow is always indicated upwards.
Top
Rolling, folding, severe tilting or tumbling or other such handling must be
avoided. ISO 7000, No 0623
The symbol has to be fixed in case of easily breakable goods.
Fragile Goods marked as such have to be handled with care and must in no way
be toppled or fastened. ISO 7000, No 0621
Goods marked as such have to be protected from high humidity, and thus
must be stored covered.
dry If it is not possible to store particularly heavy or bulky packages in halls or
shed, they have to be carefully covered with tarpaulin. ISO 7000, No 0626
Goods marked as such must be protected against excessive cold. These
cold packages should not be stored outdoors.
Maximum number of identical individual packages that can be stacked,
where n stands for the number of permissible individual packages.
ISO 7000, No 2403
Contact with packages marked as such must be avoided at low levels of
relative humidity, especially if insulating footwear is being worn or the
ground/floor is nonconductive.
Low levels of relative humidity must in particular be expected on hot, dry
summer days and very cold winter days.
11
General
417102264 Rev. 6-12.2019