Safety Data Sheets; Life Span; Safety Precautions By The Owner - ECOLAB EcoPro Serie Betriebsanleitung

NOTICE!
The details on the dosing medium safety sheet must be strictly observed;
operating personnel must be trained accordingly (training must be
documented)!
2.3.1

Safety data sheets

The safety data sheet is primarily intended for the user so that they can take any steps
necessary for safeguarding their health and safety at work. Ecolab is well aware of the
importance of safety data sheets and the responsibility that they entail. The material
safety data sheets that Ecolab provides are subject to constant control and revision.
This guarantees that the current information is available at all times.
You will be provided with up-to-date safety data sheets for the products you are using with
the installation.
In the course of the continuous improvement and further development of Ecolab products,
it can happen that products change in their composition. It is possible that products may
even be replaced with other products. In both cases the safety data sheets will be updated
and sent to you. If you are not sure you have a current version of the safety data sheet,
please contact your Ecolab consultant. He will be glad to assist you in guaranteeing that
the measures for safeguarding health in the workplace are ensured.
The best thing to do is to post the safety data sheets right beside the equipment or next to
the containers so that the proper countermeasures can be implemented at once in the
event of an accident.
Persons familiar with the operation of the device must be instructed and trained
accordingly.
2.4

Life span

Depending on properly conducted servicing (visual inspection, functional testing,
replacement of parts, etc.), the life span is minimum 2 years.
Subsequently, revision – and in some cases a major overhaul – by the manufacturer is
required.
2.5

Safety precautions by the owner

NOTICE!
Please note that the operator must train, instruct and monitor its operating
and maintenance personnel with regard to compliance with all necessary
safety precautions.
The frequency of inspections and control measures must be observed
and documented!
17
Safety
417102264 Rev. 6-12.2019