Setting Rotary Knob Function Keys; Default Setting; Selecting Default Setting; Group Setup - Motorola MTP3250 Funktionsbenutzerhandbuch

68015000899–FC (en-US)
Chapter 4: Main Menu
3 Select one of the following:
• On – You need to confirm the talkgroup selection by pressing Select or pressing the PTT
button to immediately start a call on a new talkgroup.
• Off – Attaches to the selected talkgroup without any additional prompt.
4.8.13.6

Setting Rotary Knob Function Keys

Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Rotary Knob → Function Keys.
3 Select one of the following:
• Auto – Sets the Side buttons according to the Rotary Mode.
NOTICE: If the Rotary Mode is set to:
• Dual or Volume – Display shows Auto Selected (OTB), volume can be set
only through Volume Knob.
• Scroll – Display shows Auto Selected (Volume), volume can be set only
through Side buttons.
• Volume Adjust. – Sets the Side buttons to adjust volume level.
• OTB Feature – Sets the Side buttons to the predefined One-Touch Button features.
4.8.14

Default Setting

This sub-menu item resets the radio back to default settings.
4.8.14.1

Selecting Default Setting

Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Def. Settings.
Your radio display Reset to def. settings?. Press Yes to confirm.
4.9

Group Setup

This menu item allows you to set the operation parameters, scanning and my groups folder.
102 Send Feedback