Siemens SIPART PS2 Bedienungsanleitung Seite 48

Construction
Connections, electrical
Screw terminals
•
Cable gland
•
Connections, pneumatic
7.1.4 Controller
Controller
Control unit
Five-point controller
•
Dead zone
•
dEbA = auto
dEbA = 0.1 ... 10 %
Analog-to-digital converter
Scanning time
•
Resolution
•
Transmission error
•
Temperature influence
•
7.1.5 Certificates, approvals, explosion protection
Certificates and approvals
Classification according to pressure
equipment directive (PED 97/23/EC)
CE conformity
See also
Certificates (http://www.siemens.com/processinstrumentation/certificates)
46
2.5 mm
Without Ex protection as well as with Ex i: M20x1.5 or ½-
14 NPT
With explosion protection Ex d: Ex d certified M20x1.5, ½-
14 NPT or M25x1.5
Female thread G¼ or ¼-18 NPT
Adaptive
Adaptive
Can be set as fixed value
10 ms
≤ 0,05 %
≤ 0,2 %
≤ 0.1 %/10 K (≤ 0.1 %/18 °F)
For fluid group 1 gases; fulfills requirements according to article 3, paragraph
3 (good engineering practice SEP)
The applicable directives and applied standards with their revision levels can
be found in the EC declaration of conformity on the Internet.
AWG30-14
2
SIPART PS2 (6DR5...)
A5E03436620-07, 10/2015