Siemens SIPART PS2 Bedienungsanleitung Seite 47

Construction
Material
Enclosure
•
6DR5..0 Makrolon
6DR5..1 aluminum, narrow
6DR5..2 stainless steel
6DR5..3 aluminum
6DR5..5 aluminum, flameproof
6DR5..6 stainless steel enclosure, flameproof
Pressure gauge block
•
Versions
In Makrolon enclosure 6DR5..0
•
In aluminum enclosure 6DR5..1
•
In aluminum enclosures 6DR5..3 and 6DR5..5
•
In stainless steel enclosures 6DR5..2 and 6DR5..6
•
Torques
Part-turn actuator fixing screws DIN 933 M6x12-A2
•
Linear actuator fixing screws DIN 933 M8x16-A2
•
Gland pneumatic G¼
•
Gland pneumatic ¼" NPT
•
Without sealant
With sealant
Cable glands
•
Screw-in torque for plastic gland in all enclosures
Screw-in torque for cable gland made of metal/stainless
steel in Makrolon enclosure
Screw-in torque for metal/stainless steel glands in
aluminum/stainless steel enclosure
Screw-in torque for NPT adapter made of
metal/stainless steel in Makrolon enclosure
Screw-in torque for NPT adapter made of
metal/stainless steel in aluminum/stainless steel
enclosure
Screw-in torque for NPT gland in the NPT adapter
NOTE: To avoid damage to the device, the NPT
adapter must be held in place while the NPT gland is
screwed into the NPT adapter.
Tightening torque for union nut made of plastic
Tightening torque for union nut made of metal/stainless
steel
Manometer
Degree of protection
•
Manometer made of plastic
Manometer, steel
Manometer made of stainless steel 316
Vibration resistance
•
SIPART PS2 (6DR5...)
A5E03436620-07, 10/2015
Glass-fiber reinforced polycarbonate (PC)
GD AISi12
Austenitic stainless steel 316 Cb, mat. No. 1.4581
GD AlSi12
GK AISi12
Austenitic stainless steel 316 L, mat. No. 1.4409 or 316 Ti,
mat. No. 1.4571
Aluminum AIMgSi, anodized or stainless steel 316 L
Single-acting and double-acting
Single-acting
Single-acting and double-acting
Single-acting and double-acting
5 Nm (3.7 ft lb)
12 Nm (8.9 ft lb)
15 Nm (11.1 ft lb)
12 Nm (8.9 ft lb)
6 Nm (4.4 ft lb)
4 Nm (3 ft lb)
6 Nm (4.4 ft lb)
6 Nm (4.4 ft lb)
8 Nm (5.9 ft lb)
15 Nm (11.1 ft lb)
68 Nm (50 ft lb)
2.5 Nm (1.8 ft lb)
4 Nm (3 ft lb)
IP31
IP44
IP54
In accordance with DIN EN 837-1
45