Steam Ironing - Silvercrest SDBS 2400 B2 Bedienungsanleitung

Steam ironing

♦ Fill the water tank
♦ Insert the plug into a mains power socket.
♦ Set the On/Off switch
integrated control lamp in the On/Off switch
lamp
♦ Turn the temperature control
temperature control
♦ The heat-up indicator lamp
temperature has been reached, the heat-up indicator lamp
♦ Adjust the steam power:
–
Press the "MAX" button
–
Press the "ECO" button
♦ As soon as the "MAX"
(depending on the setting), you can start steam ironing.
♦ While you are ironing, you can now press and hold the steam button
continuously spray steam onto the items being ironed from the sole of the
iron
NOTE
When you press the steam button
comes out of the sole of the iron
♦ Put the iron down on the stand
Set the temperature control
♦ Set the On/Off switch
integrated control lamp in the On/Off switch
"MAX"
♦ Pull the plug out of the mains socket.
SDBS 2400 B2
with water if necessary.
to the position "1" to switch the appliance on. The
light up, the "MAX" button
must be set within the
or "ECO" button
. Release the steam button
to the position "0" to switch the appliance off. The
or "ECO" go out.
and the heat-up indicator
flashes.
to set the required ironing temperature. The
range to produce steam.
lights up during heating. As soon as the set
to create maximum steam.
to make the appliance produce less steam.
lights up continuously
to stop producing steam.
, it can take a few seconds until steam
.
on the base station
to "min".
and the steam control lamp
goes out.
to
after ironing.
GB │ IE │
35 ■