Steam Ironing; Ironing With Steam Blast - Silvercrest SDB 2400 A1 Bedienungsanleitung

TIPS
► The iron takes longer to cool down than to heat up. Therefore, fi rst iron
delicate fabrics at lower temperature settings.
► With mixed fabrics, always set the temperature for the more sensitive fi bre.
3) Adjust the steam regulator 1 to
4) Select the best suitable temperature setting with the temperature regulator 7.
The control lamp "Temperature" 4 glows.
5) When the set temperature has been reached, the control lamp "Tempera-
ture" 4 goes out. Wait until the control lamp "Temperature" 4 goes out.
NOTICE
► To help with ironing severely wrinkled or very dry materials, you can dampen
them by using the fi ne water spray 2
6) You can now start ironing.

Steam ironing

The temperature regulator 7 must be at least at level
Otherwise it cannot produce any steam.
1) Set the steam regulator 1 to the desired steam setting.
2) Wait until the control lamp "Temperature" 4 goes out.
3) You can now start ironing.

Ironing with steam blast

The steam blast is especially suitable for smoothing diffi cult to reach parts of a
garment.
The temperature regulator 7 must be in the red marked setting range
least in order to produce a steam blast.
1) Slightly raise the steam iron..
2) Press the steam blast button
SDB 2400 A1
.
button.
3
or higher.
at the
11
GB