Herunterladen Inhalt Inhalt Diese Seite drucken

Legal Information; Technical Data - Ottobock 8S710-bebionicSkinSilicone Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
6.2 Cleaning
NOTICE
Non-observance of cleaning instructions
Damage to product and permanent soiling due to use of improper cleaning agents
Only clean the product according to the cleaning instructions provided in the instructions for
use.
NOTICE
Penetration of moisture
Loss of or limited functionality of the prosthesis
Make sure that no water gets into the prosthesis while cleaning the prosthesis cover. The
prosthesis cover is not firmly secured to the socket, so that water can get into the prosthes­
is.
Materials required:
>
warm water, soap, cloth, lint-free cloth
1) Clean the product with warm water, soap and a cloth.
2) Rinse off soap residues with water.
3) Dry the product with a lint-free cloth and allow it to air dry fully.
7 Disposal
This product may not be disposed of with regular domestic waste in all jurisdictions. Disposal that
is not in accordance with the regulations of the country where the product is used may have a det­
rimental impact on health and the environment. Please observe the information provided by the
responsible authorities in the country of use regarding return, collection and disposal procedures.

8 Legal information

8.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descrip­
tions and instructions provided in this document. The manufacturer will not assume liability for
damage caused by disregarding the information in this document, particularly due to improper
use or unauthorised modification of the product.
8.2 CE conformity
This product meets the requirements of the European Directive 93/42/EEC for medical devices.
This product has been classified as a class I device according to the classification criteria out­
lined in Annex IX of the directive. The declaration of conformity was therefore created by the man­
ufacturer with sole responsibility according to Annex VII of the directive.

9 Technical data

Reference number
Sides
Sizes
Colours
Reference number
Sides
Sizes
Colours
18
8S710=*
right (R), left (L)
S, M, L
20
8S711=*
right (R), left (L)
S, M, L
2, 3, 4, 6, 9, 11, 14, 16

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

8s711-bebionicskinsilicone

Inhaltsverzeichnis