EIN
ON
5.2 Don the prosthetic glove on the prosthetic hand
► NOTICE! Never heat the prosthetic glove (e.g. with a blow drier or oven).
Press and hold the program switch.
►
►
Turn the prosthesis on using the switch on the prosthetic
arm.
Continue to hold the program switch.
►
→ The thumb moves to the donning mode position.
►
Release the switch when the thumb is pointing fully inwards
(donning mode position).
► Slide the prosthetic hand onto the mounting tool.
► Engage the balls by turning to the left and to the right.
► NOTICE! Do not use 640F18 donning spray for application
and removal.
15