Ottobock 8S710-bebionicSkinSilicone Gebrauchsanweisung Seite 16

5.3 Removal from the prosthetic hand
► NOTICE! Never heat the prosthetic glove (e.g. with a blow drier or oven).
16
► NOTICE! Do not fold over the sleeve end for application
and removal.
► NOTICE! To prevent malfunctions, the prosthetic glove
must not be twisted in the area of the fingers and espe­
cially the thumb.
Only shorten the prosthetic glove to the final length once it has
been applied and aligned.
► Shorten the prosthetic glove to one length if necessary.
► NOTICE! Avoid all excessive force on the fingers (espe­
cially the thumb) during the donning process.
Position the prosthetic glove on the prosthetic hand for don­
ning.
► Hold the prosthetic glove at the sleeve end and pull it slowly
and carefully over the prosthetic hand.
► NOTICE! To prevent malfunctions, the prosthetic glove
must not be twisted in the area of the fingers and espe­
cially the thumb.
Adjust the prosthetic glove to fit the prosthetic hand properly.
► INFORMATION: Shorten the prosthetic glove so that it
does not lie on the skin when wearing the prosthesis.
Having no contact between the prosthetic glove and pros­
thetic socket after shortening will ensure the best rotation
for the prosthetic wrist joint.
Shorten the prosthetic glove to the desired length.