Product Description - Ottobock DynamicArm 12K100N Gebrauchsanweisung

INFORMATION
Es ist möglich, dass nur einzelne oder mehrere Komponenten nicht mehr angesteuert werden
können.
1 Foreword
INFORMATION
Date of last update: 2019-09-20
► Please read this document carefully before using the product.
► Have yourself instructed by qualified personnel in the proper and safe use of the product.
► Please contact the qualified personnel if you have questions about the product (e.g. regard­
ing the start-up, use, maintenance, unexpected operating behaviour or circumstances). The
contact information for the manufacturer is found on the back page.
Report all serious incidents that have occurred in connection with the product, both to the
►
manufacturer (see rear cover for contact information) and to the relevant authority in your
country.
► Please keep this document in a safe place.
The product "12K100N=* DynamicArm and 12K110N=* DynamicArm Plus" is referred to simply
as the product/elbow joint below.
These instructions for use provide you with important information on the use, adaptation and
handling of the product.
Only put the product into use in accordance with the information contained in the accompanying
documents supplied.

2 Product description

2.1 Design
2.2 Function
The product is a myoelectrically controlled elbow joint driven by an electric motor. It helps the
wearer perform everyday tasks in combination with other prosthetic components.
A Li-Ion battery integrated into the product provides the energy required. The "ElbowSoft TMR"
software is used for the patient-specific adjustment of the product.
If the elbow joint is off or the battery is depleted, the elbow joint can still be locked and unlocked
in any position, even when loaded, by means of the pull cable.
14
1. ON switch
2. Charging receptacle
3. Pull cable (mechanical release)
4. AFB dial
5. Humeral rotation feature adjusting screw
English