How To Connect The Output Open Collector Of The Controller - Agilent Technologies Special Turbo-V 1K-G Bedienungshandbuch

17 Technical Information
J1 - In-Out
Figure 13
How to Connect the Output Open Collector of the
Controller
Here below there are the typical connections of the open collector
input of Special Turbo-V 1K-G to an external system. Two cases are
considered:
1
2
Please note that on the connector a 24 Vdc, 60 mA voltage, a
GROUND signal and the open collector pin are available.
222/258
the customer supplies the 24 Vdc
the customer does not supply the 24 Vdc.
Special Turbo-V 1K-G User Manual / 87-901-006-01 (A)
MATING CONNECTOR