Preparation For Installation - Agilent Technologies Special Turbo-V 1K-G Bedienungshandbuch

If for any reason the shelf life time is exceeded, the pump has to be returned to
CAUTION!
the factory. Please contact the local Agilent Vacuum Sales and Service
representative for informations.

Preparation for Installation

The Special Turbo-V 1K-G is supplied in a special protective packing.
If this shows signs of damage which may have occurred during
transport, contact your local sales office.
When unpacking the system, be sure not to drop it and avoid any
kind of sudden impact or shock vibration to it.
Do not dispose of the packing materials in an unauthorized manner.
The material is 100 % recyclable and complies with EEC Directive
85/399.
In order to prevent outgassing problems, do not use bare hands to handle
CAUTION!
components which will be exposed to vacuum. Always use gloves or other
appropriate protection.
Normal exposure to the environment cannot damage the Special Turbo-V 1K-G.
NOTE
Nevertheless, it is advisable to keep it closed until it is installed in the system,
thus preventing any form of pollution by dust.
Special Turbo-V 1K-G User Manual / 87-901-006-01 (A)
Instructions for Use

Preparation for Installation

16
199/258