Changing Tools; Torque Selection Ring/Drill Setting; Speed Gearbox; Operation - Parkside PABS 16 A1 Originalbetriebsanleitung

Changing tools

Your cordless drill has a fully automatic spindle
lock .
When the motor is stopped, the power train is locked
so that the chuck can be opened by turning
After you have attached the desired tool and tight-
ened it by turning the chuck
working. The spindle lock is automatically released
when the motor starts (ON/OFF switch pressed

Torque selection ring/drill setting

You can set the torque using the torque selection
ring .
♦ Select a low level for small screws or soft
materials.
♦ Select a high level for large screws, hard materials
or removing screws.
♦ Select the drill setting for drilling work by adjusting
the torque selection ring to the position .

2 speed gearbox

CAUTION!
► Only operate the speed selection switch
when the appliance is at a standstill. Other-
wise the appliance can be damaged.
In first gear (speed selector switch
position: 1)
you can reach a speed of approx. 400 rpm and
a high torque. This setting is suitable for all screw-
driving.
In second gear (speed selector switch
position: 2)
you can reach a speed of approx. 1300 rpm
for carrying out drilling work.
PABS 16 A1
.
, you can continue
).
in
in

Operation

Switching on and off
Switching on:
♦ To start the appliance, press the ON/OFF
switch and keep it pressed in.
The LED work light
ON/OFF switch
This allows illumination of the work area in low
lighting.
Switching off:
♦ Release the appliance's ON/OFF switch
switch off the appliance.

Adjusting the rotational speed

Pressing the ON/OFF switch
speed. Increasing pressure increases the speed.
NOTE
► The integrated motor brake ensures rapid
stoppage.

Changing the direction of rotation

♦ Change the direction of rotation by pressing the
rotational direction switch
or right.
illuminates when the
is depressed even lightly.
lightly yields a low
towards the left
GB
to
MT
37