Inserting / Removing The Battery Pack Into / Out Of The Device; Checking The Battery Charge State; 2-Speed Gear Operation; Torque Preselection - Parkside PSBS 24 A1 Bedienungs- Und Sicherheitshinweise

The green charge indicator LED
the charging process is complete and the
battery pack is ready for use.
9
½
Do not use the quick-charge process to charge
a battery pack for a second time in close
9
succession. Otherwise there is the danger that
the battery pack 9 will become overcharged
and its useful life and that of the charger reduced.
½
Switch the charger
14
utes between successive charging processes.
To do this pull the mains plug out of the socket.
© Inserting / removing the battery
pack into / out of the device
Removing the rechargeable battery pack:
In order to remove the rechargeable battery,
turn the appliance 180°.
Press the unlocking button
chargeable battery pack
Inserting the rechargeable battery pack:
Push the rechargeable battery pack
the appliance.
©
Checking the battery
charge state
Press the battery charge state test button
The remaining charge capacity is shown on the
LED display .
2
©

2-speed gear operation

In first gear (gear selector switch
position: 1)
the device achieves a speed of approx. 500 min
and a high torque. For example, for screwing work
with small screw diameters.
In second gear (gear selector switch
position: 2)
the device achieves a speed of approx. 1800 min
and a lower torque. For example, for rapid drill
progress in masonry or large drill or screw diameters.
All manuals and user guides at all-guides.com
16 shows that
off for at least 15 min-
8 and push the re-
out of the appliance.
9
onto
9
3 .
1
in
-1
1
in
-1
©

Torque preselection

Use the torque preselection ring
When this set torque is reached the clutch decouples
the drive. This allows you to screw in screws to a
predetermined depth, which is ideal e.g. for screw-
ing in a series of screws.
Select a lower setting for small screws or soft
materials.
Select a high setting for large screws, hard ma-
terials, or when screwing out screws.
For drilling tasks select drilling setting by placing
the torque preselection ring in the
©
Drilling / screwing /
impact drilling
Drilling / screwing:
Turn the setting ring
12
Impact drilling:
Turn the setting ring
12
©

Changing inserted tools

Your cordless hammer drill has a fully automatic spindle
lock and is fitted with a single-sleeve drill chuck
with radial lock "Made in Germany" by
Once the motor has come to a halt, the drive shaft
is automatically locked so that the quick-action drill
chuck can be opened simply by turning it in the
11
direction of the arrow (see labelling at the front of
the drill chuck " AUF / OPEN").
After you have inserted the tool you wish to have, turn
the drill chuck in the direction of the arrow until you
cannot hear any click any more (see the labelling on
the front of the drill chuck "
drill chuck will then lock automatically. The spindle
lock releases itself automatically when the motor is
started (by operation of ON / OFF switch
Preparing for use
to set the torque.
13
position.
to the symbol .
to the symbol .
.
ZU / CLOSE"). The
).
6
GB/IE/CY 11