Introduction; Intended Use; Features; Package Contents - Parkside PABS 16 A1 Originalbetriebsanleitung

CORDLESS DRILL
PABS 16 A1

Introduction

Congratulations on the purchase of your
new appliance. You have selected a high-
quality product. The operating instructions
are part of this product. They contain im-
portant information on safety, usage and
disposal. Before using the product, familiarise your-
self with all handling and safety guidelines. Use
GB
the product only as described and for the range
MT
of applications specified. Please also pass these
operating instructions on to any future owner.

Intended use

This appliance is intended for screwing and un-
screwing screws as well as drilling in wood, metal,
ceramics and plastics. The light on this appliance is
intended to illuminate the immediate work area of
the appliance.
Use this product only as described and for the
areas of applications specified. The appliance is
not meant for commercial use. Any other usage of
or modification to the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse.

Features

Speed selector
Bit holder (magnetic)
Battery display LED
Rotational direction switch/lock
ON/OFF switch / speed control
Battery pack
Release button for battery pack
LED work light
Chuck
Torque selection ring
High-speed charger
Red charge control LED
Green charge control LED
32

Package contents

1 cordless drill PABS 16 A1
1 high-speed battery charger PABS 16 A1-2
1 battery pack PABS 16 A1-1
1 bit PZ2 50 mm
1 carrying case
1 set of operating instructions

Technical data

Cordless drill:
Rated voltage:
Drive:
Idle speed:
Max. torque:
Chuck clamping
range :
Drill diameter:
Battery: PABS 16 A1-1
Type:
Rated voltage:
Capacity:
High-speed battery charger: PABS 16 A1-2
INPUT:
Rated voltage:
Power consumption:
OUTPUT:
Rated voltage:
Charging current:
Charging time:
Fuse (internal):
Protection class:
Noise emission value:
Noise measurement value determined in accordance
with EN 60745. The A-rated noise level of the
power tool is typically as follows:
Sound pressure level:
Sound power level:
Uncertainty K:
PABS 16 A1
(direct current)
16 V
2 speed drive
1st gear: n 0–400 min
0
2nd gear: n 0–1300 min
0
25 Nm
max. Ø 10 mm
Steel: 10 mm
Wood: 25 mm
LITHIUM ION
(direct current)
16 V
1.5 Ah
230 - 240 V ~ , 50 Hz
(alternating current)
33 W
(direct current)
16 V
1.8 A
approx. 60 min
T2A
2 A
II /
L = 68 dB(A)
PA
L = 79 dB(A)
WA
K = 3 dB(A)
PABS 16 A1
-1
-1