Using The Viot Suite; Databases; Starting From Otoaccess - Interacoustics Viot Gebrauchsanweisung

4 Using the Viot Suite

NOTICE
Make sure that the video otoscope is properly connected to your PC before starting the Viot Suite!

Databases

4.1.1 Starting from OtoAccess®
To start the Viot Suite from OtoAccess®:
1. Open OtoAccess®
2. Select the patient you want to work with by clicking on it; it will then highlight blue to indicate
selection.
3. If the patient is not yet listed:
- press the New client button
- fill in at least the mandatory fields, marked with a red asterisk
- save the patient details by pressing the Save patient information button
4. Double click on the Viot Suite in the Select Instrument box.
3
2
For further instructions about working with the database, please see the operation manual for OtoAccess™.
Viot™ - Instructions for Use - EN
4
Page 10