Maintenance And Cleaning - Kalor SLIM IDRO 16 Bedienungsanleitung

Maintenance and cleaning

All cleaning of all parts must be carried out with the stove completely cold and unplugged to
avoid burns and thermal shock. The stove does not need much maintenance if used with certified
quality pellet. The need for maintenance varies depending on the conditions of use (switching on
and off repeatedly) and depending on the performance required.
Parts
Brazier
Cleaning the ash collection
compartment with suction device
Cleaning ash tray
Cleaning the door and glass
Exchanger (turbulators)
Cleaning the interior heat exchanger /
smoke fan compartment
Cleaning complete exchanger
Clean "T" to exhaust
Flue
Door gasket ash
Internal parts
Flue pipe
Circulation pump
Plate heat exchanger
Hydraulic components
Electromechanical components
◊ by the user
• by the authorised qualified technical assistance
BY THE USER
Daily control
The thermostove requires a simple and thorough cleaning
in order to ensure a more efficient performance and
smooth operation.
While cleaning the inside of the thermostove, to prevent
the escape of ashes, you can start the fan flue exhaust.
To enable this feature, you must press the button
then .
The display shows "PUL ST U F" (cleaning thermostove).
To stop the fan, simply press and hold the button
for completion of a cleaning cycle (255 seconds).
Every 2-3
Everyday
days
◊
◊
◊
◊
◊
Clean the grate using the appropriate tool from the ash
and any incrustation which could obstruct the passage
of air. In the case of depletion of pellets in the tank may
accumulate unburned pellets in the burn pot.
Always empty the residuals from the grate before each
and start. Remember that only a brazier located and clean
properly can ensure ignition and optimal operation of your
thermostove. When positioning the crucible, carefully
or wait check that the ends of the pads completely adhere to
their home and that the hole with pipe dedicated to the
passage of the resistance.
There should be no residual combustion in the contact
zone between the edges of the crucible and the support
surface on the door crucible.
Every Every 15 Every 30
week days
The decreased or absent cleaning can
cause misfire and cause damage to the
thermostove and the environment (possi-
ble emissions of soot and unburned). Do not pour
the pellets may be present in the brazier to misfire.
Every 60- Every 1
days 90 days year
•
•
•
•
•
•
•
•
•
•
•
47