Kalor SLIM IDRO 16 Bedienungsanleitung Seite 43

UT01: Heating timer-thermostat enabling and disa-
bling and current hour setting.
This parameter is used to set the current day of the week
or to deactivate the set programming.
Press buttons and
shown in the following table:
Upper
display
Day 1
Day 2
Day 3
Day 4
Day 5
Day 6
Day 7
OFF Heating timer-thermostat disabled
Example:
if today is Thursday, select "da y 4 "; but select "OFF" to
start the pellet boiler stove manually (without program-
ming) so that the heating timer-thermostat is disabled.
Press button to go to the following parameter.
UT02: Current hour setting
This parameter is used to set the current hour, press
buttons and to select the current hour.
Press button to go to the following parameter.
UT03: Current minutes setting
Press buttons and
Press buttons to go to the following parameter.
UT04: Technical parameters setting
Press button to go to the following parameter.
UT05: Thermostove first start-up time adjustment
This parameter indicates the time at which the pellet boiler
stove will be started: use buttons
desired time, with 10 minute steps.
Press button to go to the following parameter.
UT06: Thermostove shutdown time adjustment
This parameter indicates the time at which the pellet boiler
stove will be turned off: use buttons
the desired time, with 10 minute steps.
Press button to go to the following parameter.
to select the desired value as
MEANING
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
to adjust current minutes.
and to set the
and to set
UT07: Week day selection
Press button o select the days of the week. Press
button to enable (ON) or disable (OFF) the pellet boiler
stove start-up day as shown in the following table:
Upper
MEANING
display
Day 1 Monday
Day 2 Tuesday
Day 3 Wednesday
Day 4 Thursday
Day 5 Friday
Day 6 Saturday
Day 7 Sunday
In the following example, the pellet boiler stove is only
started on Saturdays and Sundays.
Day 1 Day 2 Day 3
Monday Tuesday Wednesday
off 1 off 2 off 3
Confirm and continue with key
UT08 UT16
continue as indicated above to set the second, third and
fourth ignition times.
If the stove is controlled by an external thermostat,
when the thermostat reaches the preset temperature,
"EC o TE RM" will be shown on the pellet boiler stove dis-
play.
The room temperature thermostat does
not turn off and on the pellet boiler stove;
it sets the stove in saving mode.
Lower
display
ON1/OFF1-Si o No
ON2/OFF2-Si o No
ON3/OFF3-Si o No
ON4/OFF4-Si o No
ON5/OFF5-Si o No
ON6/OFF6-Si o No
ON7/OFF7-Si o No
Day 4 Day 5 Day 6
Thursday Friday Saturday
off 4 off 5 on 6
.
Day 7
Sunday
on 7
43