Eu Declaration Of Incorporation - Pendix Montageanleitung

11. EU declaration of incorporation

In accordance with EU Machine Directive 2006 / 42 / EU dated 17th May 2006, Annexe II B, we herewith
declare that the article described below as an incomplete machine or machine part in conception and construction
as well as in its design determined for commercial use agrees with the following basic Safety and Health Protec-
tion Requirements in accordance with Annexe I of EU Guideline 2006 / 42 / EU. Nos. 1.1.3.; 1.2.1.; 1.2.2.; 1.2.3.;
1.2.4.1.; 1.2.6.; 1.3.4.; 1.3.9.; 1.5.1; 1.5.2.; 1.5.4.; 1.5.5.; 1.5.6.; 1.5.8; 1.5.10.; 1.5.11.
Putting into operation (commissioning) is not allowed until and when – insofar as applicable - the machine into
which the incomplete machine or machine part is to be installed, fully agrees with the regulations laid down in
Machine Directive 2006 / 42 / EU.
The technical documentation in accordance with Annexe VII part B have been provided, and will be transmitted to
the relevant (electronic) references in the separate states upon justified request to do so.
Manufacturer:
Pendix GmbH
Anton-Günther-Weg 4
08058 Zwickau
Description and identification of the machine:
Function: Electric bicycle support motor (up to 25 km / h or 15 ½ mph)
Type / model : Pendix
Serial number:
Year of construction:
Agreement with other guidelines / regulations also relating to the product in question is herewith declared:
• RoHS (Restriction of Hazardous Substances) Directive (2011 / 65 / EU) dated 08 June 2011
• EMC (Electromagnetic Compliance) Directive (2014 / 30 / EU) dated 26 February 2014
Harmonized standards used, in particular:
• DIN EN ISO 12100 Safety of machinery - General
principles for design - Risk assessment and risk re-
duction (ISO 12100:2010); Basic concepts, general
principles for design – basic terminology, methodo-
logy, Risk assessment
• DIN EN ISO 13849-1 Safety of machinery – safe-
ty-related parts of controls – part 1: General Design
Guidelines
NOTE: DIN = Deutsches Institut für Normung (Ger-
man Standards Institute), EN = European Norm, ISO
= International Organization for Standardization
Other guidelines, standards and technical speci-
fications used:
• REACH (Registration, Evaluation, Authorisation &
restriction of CHemicals) Regulation 1907 / 2006
dated 18.12.2006
• The provisions of the Directive (EU) 2006 / 66 of the
European Parliament and Council, dated 06 Sep-
tember 2006 on batteries and accumulators and
waste batteries and accumulators
• WEEE (Waste Electrical & Electronic Equipment)
Directive 2012 / 19 / EU dated 04. Juli 2012
• DIN EN 15194 – Cycles - Electrically power assis-
ted cycles - EPAC Bicycles; e.g. German and Eng-
lish version prEN 15194:2015
Legally responsible for technical documentation:
Christian Hennig
(see Manufacturer's address)
Place/Date:
Zwickau (Germany) August 18, 2015
Legally responsible person, details:
Christian Hennig, CTO
EN
39