Warnings - Jacuzzi UNIQUE Montageanweisung

WARNINGS

Make sure that all users know how to use the spa safely.
How frequently you should check water quality depends on
how frequently the spa is used.
Ensure that the chemicals used are suitable for use in spas;
chemicals designed for swimming pools must not be used
as treatment of water in swimming pools and spas is very
diff erent.
CAUTION
Only the load-bearing covers are designed to support
weights (max. 200kg), but they must not be subjected to
violent, sudden stresses (jumping, etc.).
Do not sit, walk, or lie on other types of covers (non-load
bearing). Do not deposit objects.
To prevent accidental falls into the spa, it is advisable to in-
stall the key-locking system provided with the thermal co-
ver ( 4).
CAUTION
Read and follow all the instructions related to the use and
storage methods for chemical products, keeping strictly
to the manufacturers instructions on the packets.
After adding the chemicals, the fi ltering system should be
run for at least 30 minutes to ensure complete dilution in the
water.
Never clean the fi lter when the pump is running. Turn off the
main switch fi rst.
Never start the pump and heater if the water level is not abo-
ve the highest whirlpool nozzles:
Always turn off the main switch when the spa is empty.
With the TEST button, periodically check the effi ciency of
the circuit breaker installed up the line from the spa.
42