Notes On Safety; Symbols And Icons; Symbols In The Manual; Symbols On The Equipment - Parkside PTHSA 20-Li A1 Originalbetriebsanleitung

Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may differ
during actual use of the power tool from
the stated value depending on the manner
in which the power tool is used.
Safety precautions aimed at protecting the
user should be based on estimated exposure
under actual usage conditions (all parts of
the operating cycle are to be considered, in-
cluding, for example, times during which the
power tool is turned off and times when
the tool is turned on but is running idle).

Notes on Safety

This section deals with the basic safety
regulations to be observed when working
with the electric hedge trimmer.

Symbols and icons

Symbols in the manual

Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Instruction symbols with information
on preventing damage.
Help symbols with information on
improving tool handling.

Symbols on the Equipment

Caution!
Read through the instruction manual
carefully.
Wear personal protective equip-
ment. Basically, wear protective
goggles or, even better, face pro-
tection, ear protection, safety hel-
met, cut-protection working clothes.
Wear cut-resistant gloves.
Wear anti-slip safety shoes.
Keep the equipment away from
nearby people.
Do not use the hedge trimmer in the
rain or on wet hedges.
Danger of death by electrocution!
10 m
Keep at least 10m away from
power lines.
Caution! Falling objects. Particu-
larly when cutting overhead.
Caution! Risk of injury from blades
in operation.
410 mm
Cutting length
Remove the battery prior to servic-
ing the appliance.
GB IE NI
7