Notes On Safety; Symbols - Parkside PHSA 12 A1 Originalbetriebsanleitung

The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).

Notes on Safety

This section details the basic safety instruc-
tions for working with the appliance.

Symbols

Symbols on the Equipment
The device is part of the Park-
side X 12 V TEAM series
Caution!
Read through the instruction manual
carefully.
Wear goggles.
Wear ear protection.
Wear safety gloves.
Cutting hazard.
Caution! Risk of injury from
moving blades.
Do not use the hedge trimmer in the
rain or on wet hedges.
Remove the battery prior to servi-
cing the appliance.
Information of the acoustic power
level L in dB.
WA
Electrical appliances must not be
disposed of with the domestic waste.
Graphical symbol on the packaging
Recycling symbol: Corrugated
cardboard
Dispose of products and packaging
in an environmentally friendly man-
ner
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Instruction symbols with information
on preventing damage.
GB IE
21