Operation - Klarstein Iceblock Prosmart 9 Bedienungsanleitung

OPERATION

Before getting started
Temperature range
Maximum cooling
DB/WB(°C) 35/24
Make sure that the exhaust hose is correctly installed. Safety instructions for cooling and
dehumidification:
• When using the cooling and dehumidifying functions, wait at least 3 minutes after
turning off the power before turning the power on again.
• Make sure the power supply meets the requirements.
• Use an AC connection.
• Only use the socket for this device and make sure that no other devices are
connected to this circuit
Auto mode
Based on the current room temperature, the mode is automatically selected: cooling, air
humidification or heating (see table).
Room Temperature (Tr)
Mode
Set Temperature
Cooling
• Press the Mode button until the cooling symbol appears on the screen.
• To select the desired temperature (16 °C - 31 °C), press the up or down buttons.
• Press the Speed button to select the fan speed.
Minimum cooling
18/12
23 °C ≤ Tr °C < 26 °C
Dehumidification
23 °C
Tr ≥ 26 °C
Cooling
25 °C
EN
29